Not Logged in. Click to Login/Register

Search catalog:
 
Wiki Catalog Map

Still Cameras (836)
   KMZ - Moskva (10)
   KMZ - Zenit (84)
   KMZ - Zorki (39)
   KMZ - Other (33)
   GOMZ / LOMO - Komsomolets/Lubitel (15)
   GOMZ / LOMO - Smena (47)
   GOMZ / LOMO / VOOMP - Other (75)
   Medical and Special Cameras (16)
   FED 1 (19)
   FED 2 (12)
   FED 3 (10)
   FED 4 (6)
   FED 5 (5)
   FED Other (18)
   Kiev / Arsenal - Kiev Rangefinder (29)
   Kiev / Arsenal - Kiev SLR (28)
   Kiev / Arsenal - Other (17)
   MMZ / BelOMO - Smena/Vilia/Vesna (21)
   BelOMO - Elikon (9)
   BelOMO - Zenit (21)
   MMZ / BelOMO - Other (20)
   Efte - Arfo (9)
   KGB - Spy Cameras (48)
   Military and Official Use Cameras (36)
   Commemorative Cameras (43)
   Presentation and Engraved Cameras (10)
   Russian Leica Copies (5)
   Modified and Fantasy Cameras (61)
   Homemade Cameras (39)
   Non-Russian Communist Cameras (14)
   Imported - Retailed in Russia / USSR (pre-1929) (2)
   Made for Russian Market (5)
   Pre-1917 Russian Cameras (6)
   Non-Russian Lomography Cameras (3)
   Other Cameras (18)
   Unidentified / Contested Authenticity (3)
Movie Cameras (66)
Lenses & Optics (211)
Photo Equipment
& Accessories (259)
Movie Equipment and Accessories (16)
History, Documents
& Ephemera (152)
Member Articles & Blogs (59)
Still Cameras > GOMZ / LOMO / VOOMP - Other > Akvakon Prototype
<< Previous entry      Next entry >> Print this entry      Start forum thread about this entry     Edit this entry    

Akvakon Prototype
1988

Underwater Camera Prototype
Full-frame 35 mm camera ..... Prototype #2
Made with the body of a LOMO LC-A ... serial # 88105606 ..... lens: Minitar - 32mm f 2.8
factory : LOMO / Leningrad, USSR ...... year : circa 1988

notes: This camera is one of several known prototypes of this first model of LOMO underwater - all weather camera. The name should probably be accurately translated to English as "Aquakon". The camera is based on a LOMO LC-A Kompact and the body of that camera is used in this prototype. The automatic exposure and focusing systems are the same as the LC-A.

This example has the number "2" stamped and written in pencil in several places on the interior.

The outer casing is made of injection-molded and milled aluminum, painted with bright red textured enamel paint, with a black-painted aluminum textured removable back. The inside of the back is hand-milled aluminum, painted black.

Features: Simple wide view Galilean viewfinder; Focusing by a winged knob on the front (left-handed) 0.8 meters - infinity (by guesswork); Exposure settings f. 2.8 - 16 and "A" (automatic) by winged knob on front (right-handed); Shutter speed set automatically (same system as LC-A only with small window on front, under rewind knob for CDS meter); Central shutter, 2 sec. - 1/500 sec.; Small light on the bottom left-handed side, probably to indicate low light level; Rewind knob also sets the film speed, viewable through a small windows on the back; Unusual reverse set film winding lever which also doubles as the shutter release when pushed inward (to wind film, pull out and back / to release shutter, push in towards body); Underwater depth guage on the back; Rubber seals all around the perimeter of the removable back and stainless steel latches on the sides; Three small batteries on the inside (not easily removable in this prototype) to power the automatic exposure system; Small turn screw on bottom to release sprocket column for rewinding.

Measurements: 5" wide x 3.75" tall x 2.25" deep. ..... Weight: 22.5 oz.

From Collection of Bill Parkinson
more photos at: nightphoto.com
(Click to enlarge)


Created by Vlad on 8/15/2007 10:21:28 PM   |   Last Edited by Vlad on 9/5/2007 9:05:11 PM   Revision History  
Share
Related Entries:
Still Cameras > GOMZ / LOMO / VOOMP - Other > Akvakon 2 Prototype
Still Cameras > GOMZ / LOMO / VOOMP - Other > Lomo Compact - A (LC-A)
  • Request Entry Removal
  • Request Image Removal

  • Google
     

    Contact us

    Hits: 915244