Posted - Feb 13 2009 : 05:41:34 AM I send you pictures on your private email... friendly, Alain
mermoz37
Posted - Feb 12 2009 : 07:59:41 AM No..they are not 4 screws but 3 rivets + 1 hole for stop screw oversized.(same as Zorki 4 ) I will send you picture out and inside top cover.
my adress is : berryalain37@yahoo.fr use it please to tell me your adress for letter.
okynek
Posted - Feb 11 2009 : 7:29:32 PM Thank you Alain! I really appreciate this!!! Please send me e-Mail on okynek@yahoo.com or let me know your e-Mail address I'll send to you shipping money and my address. Also in my Mir accessory shoe was attached by 4 screws(no rivets), probably another modification? Someone was trying to fix this camera, but apparently give up open it, but managed to lose the shoe part. Under top cover, camera has special plate with threads for the screws to hold the shoe. I do have this plate. After some twicling I managed to make camera work as a silk!!!, but shoe is still missing , hopefully not for long
mermoz37
Posted - Feb 11 2009 : 11:57:01 AM dear friend, no problem , I can send to you missing parts (free cost for you ),except stamps for shipping in normal enveloppe (letter) :
..1 accessorie shoe + spring counter-plate + stop screw
but you must know this shoe is joint to the camera top with 3 rivets ...So I try to dismantle these rivets as clean as I will do, but without garanty of success (May be it will be hard to re-use them on your camera anyway you can stick the shoe and after put the rivets only for cosmetic . You must know it is easy to replace by nuts an screws because impossible to see them under the spring plate .
, hopefully not for long 
anyway you can stick the shoe and after put the rivets only for cosmetic . You must know it is easy to replace by nuts an screws because impossible to see them under the spring plate .