Note: You must be registered in order to post a reply. To register, click here. Registration is FREE!
T O P I C R E V I E W
Fred_L
Posted - Feb 17 2012 : 12:36:11 PM Hello!
Today I am looking for a part for my FT-2. Is is not mechanical part, but I miss the plate on top of camera, where we can read the different positions of the 2 levers to choose the speed. The four screws that maintain the plate are here, but not the plate itself.... May be someone could help me please?
Posted - Feb 08 2015 : 11:46:13 AM Dear friends, I have acquired an FT-2 camera without the cassettes inside. I have searched the internet regarding spare ones, but only came across advice to simply buy another one with cassettes. Is this really the only way or does someone know maybe a DIY solution to overcome the problem?
Best regards to all, Marko
Fred_L
Posted - Feb 21 2012 : 11:40:16 AM Hi Luiz
Thank you very much I have another one so I can do what you suggest. In the meantime, I will try to find one in a camera sold for parts...Maybe it is possible in Bievres....
All the best
Fred
Luiz Paracampo
Posted - Feb 19 2012 : 12:45:17 PM Dear Fred No problems at all. If you have another FT2 or a frind who has, you need to remove the plate ot the other camera, make a quality Xerox copy (in color mode) and plastify it in the nearer paper stock shop. After this it is a patience job. Make first the holes and finally cut it in the right size and isntall the new sheet. Everything is OK Good luck! Regards LP
