I've purchased a "FED Stemar" Lens and can use instructions as how I get the lens so it's horizontal on the body. I would assume there is a screw adjustment to loosen in order to rotate the lens in the proper alignment.
Hello Bull! Go to page: http://www.novacon.com.br/h3comp2a.htm Observe the 3 pictures with the lens in various positions You have four big screws at rear and four smaller in the front. Loosing them, we set te lens in the proper position. It is a kind of "wafer type" construction lens. Regards. LP
At first screw the set in the camera. With a nail enamel mark the top. Let it dry. Remove the assy from the camera. Lossen the screws. Place the inner nucleus in the correct position. Retight the screws. Easy. Good luck! LP