Home | Profile | Register | Active Topics | Members | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?


 All Forums
 General Discussion
 Collectors and Users Open Forum
 Fed stereo camera repair manual
 New Topic
 Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  
Balogh Benedek
Balogh.benedek22

Hungary
1 Posts
Posted - Nov 08 2023 :  11:23:49 AM  Show Profile  Reply with Quote
Hi!

Does anybody have a pdf of the fed stereo camera repair manual?

Thanks a lot!

Benedek

Vladislav Kern
Vlad
USA
4252 Posts
My Collection

Posted - Nov 10 2023 :  2:39:30 PM  Show Profile  Visit Vlad's Homepage  Reply with Quote
Hu Benedek, there seems to be one for sale: https://www.berezin.com/3d/3dbooks.htm#fedrepair
Go to Top of Page
Ulrich W.
uwittehh
Germany
841 Posts
My Collection

Posted - Nov 10 2023 :  3:08:59 PM  Show Profile  Visit uwittehh's Homepage  Reply with Quote
Several years ago I have found this, maybe it helps a bit:

----------------------------------------------------------

I opened my new FED to find out how it worked. The bottom cover was easy
to remove, having all screws apparent. However, it hid nothing of interest,
only the battery case.

The top cover was another affair, indeed. I first thought that the levers
were ‘clipped’ in place, but no. The film advance lever can be removed by
unscrewing the top part of it (use a large pair of pliers, protected with
tape or cloth so you won't scratch the paint if you loose grip). Then it's
easy to get the lever and washers off. There is a last threaded washer to
unscrew on the axis of that lever.

The ASA setting knob unmounts the same way.

The rewinder is easier to unmount; open the back of the camera, hold the
axis with a plier and the black top of the winder unscrews from the axis.
(Pay attention when rescrewing all these, it's easy to force the threadings.)
There's a last small screw to remove, under the rewinder. You can now lift the
top cover, but be careful of the flash cable.

The exposure mechanism of the FED is astoundingly simple. There's a Light
Sensitive Resistor with a little plate in front of it. The plate has several
holes in it. The diameter of the hole determines how much light is allowed
in, and this is the ASA setting wheel. (If you remove this wheel, be careful
that on the up left of the LSR there's a small spring with a steel ball that
‘clicks’ the wheel in position when you select an ASA setting.)

The LSR is connected to the battery and to an old fashioned VU-meter. The
needle of the VU-meter moves accordingly to the quantity of light that comes
on the LSR. When you're in ‘A’ mode, and depress the knob, a cam comes on the
needle, and select a f-stop accordingly to the needle's position. I could not
get further, however because I did not see how to split the camera in two, so
I could see the shutter mechanism at work. (I always loved that kind of clock-
like mechanisms ;-)

-------------------------------------------

Regards
Ulrich

http://fotos.cconin.de
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic
 Reply to Topic
 Printer Friendly
Jump To:
USSRPhoto.com Forums © USSRPhoto.com Go To Top Of Page
Snitz Forums 2000
Google