Topic
Topic author: Luiz Paracampo
Posted on: 20071113183612
Very good Bill!
This NKAP is extremely rare, not so for the original Tempiphot!
At http://www.photohistory.ru/Exposimeters.html there is also a discription of such meter. There is an explanation of use of such instrument that I found particularly confusing (besides being in Russian) so I prepared what I fell to be an easier way of description:
At the front left of the exposure meter, there is a manual pointer switch intended for operating the meter in high and low lights levels.
The circular scale ring in the internal of the exposure meter window has four scales : Two Movie scales. <font color="pink"><font size="3">KD</font id="size3"></font id="pink"> (Cyrillic) means “Kadrov” (frames per second) and there are marked <font color="orange">8 16 32 64</font id="orange"> (red) and 8 16 32 64 (black), respectively to be used in High light levels (red) and Low light levels (black) - and two shutter speed scales.
The full fraction reading (black and red numbers) are used for High light levels and the fractions without the red numbers are used for Low light levels,
The exposure meter is calibrated in <font color="pink"><font size="3">X</font id="size3">N<font size="3">D</font id="size3"></font id="pink"> (Cyrillic) meaning H&D or Hurter and Driffield's numbers originally used in Russia before WWII. The largest triangle has the scale of film speeds.
The smallest triangle sets the sensitivity value with the filter factor compensator, directly to the desired diaphragm. These triangles are coupled to the internal ring of shutter speeds.
When directed to the subject to be photographed, the galvanometer pointer indicates the needed shutter speed needed for the chosen diaphragm.
We include a table of film speeds used in the meter with the corresponding present ISO equivalents:
<font color="orange">It begins in 0,8 ASA and goes up to 6.4 ASA!</font id="orange"> These were the commom materials found in 30's years....
<font color="orange">H&D</font id="orange"> ISO(ASA)
<font color="orange">1</font id="orange"> 0.8
<font color="orange">2;5</font id="orange"> 1.0
<font color="orange">3</font id="orange"> 1.2
<font color="orange">4</font id="orange"> 1.6
<font color="orange">5</font id="orange"> 2
<font color="orange">6,4</font id="orange"> 2.5
<font color="orange">8</font id="orange"> 3.2
<font color="orange">10</font id="orange"> 4
<font color="orange">12,5</font id="orange"> 5
<font color="orange">16</font id="orange"> 6.4
This NKAP is extremely rare, not so for the original Tempiphot!
At http://www.photohistory.ru/Exposimeters.html there is also a discription of such meter. There is an explanation of use of such instrument that I found particularly confusing (besides being in Russian) so I prepared what I fell to be an easier way of description:
At the front left of the exposure meter, there is a manual pointer switch intended for operating the meter in high and low lights levels.
The circular scale ring in the internal of the exposure meter window has four scales : Two Movie scales. <font color="pink"><font size="3">KD</font id="size3"></font id="pink"> (Cyrillic) means “Kadrov” (frames per second) and there are marked <font color="orange">8 16 32 64</font id="orange"> (red) and 8 16 32 64 (black), respectively to be used in High light levels (red) and Low light levels (black) - and two shutter speed scales.
The full fraction reading (black and red numbers) are used for High light levels and the fractions without the red numbers are used for Low light levels,
The exposure meter is calibrated in <font color="pink"><font size="3">X</font id="size3">N<font size="3">D</font id="size3"></font id="pink"> (Cyrillic) meaning H&D or Hurter and Driffield's numbers originally used in Russia before WWII. The largest triangle has the scale of film speeds.
The smallest triangle sets the sensitivity value with the filter factor compensator, directly to the desired diaphragm. These triangles are coupled to the internal ring of shutter speeds.
When directed to the subject to be photographed, the galvanometer pointer indicates the needed shutter speed needed for the chosen diaphragm.
We include a table of film speeds used in the meter with the corresponding present ISO equivalents:
<font color="orange">It begins in 0,8 ASA and goes up to 6.4 ASA!</font id="orange"> These were the commom materials found in 30's years....
<font color="orange">H&D</font id="orange"> ISO(ASA)
<font color="orange">1</font id="orange"> 0.8
<font color="orange">2;5</font id="orange"> 1.0
<font color="orange">3</font id="orange"> 1.2
<font color="orange">4</font id="orange"> 1.6
<font color="orange">5</font id="orange"> 2
<font color="orange">6,4</font id="orange"> 2.5
<font color="orange">8</font id="orange"> 3.2
<font color="orange">10</font id="orange"> 4
<font color="orange">12,5</font id="orange"> 5
<font color="orange">16</font id="orange"> 6.4