David,
I've been curious, and checked the KMZ factory site since they did a lot of stuff for space program and did find this information:
http://www.ussrphoto.com/UserContent/15112011_k2.jpg
http://www.ussrphoto.com/UserContent/15112011_k2.jpgКиноаппарат К2 (16ЛК-К2) был предназначен для киносъемки космонавтом-оператором на поверхности Луны, в условиях глубокого вакуума и больших перепадов температур.
Moviecamera K2 (16LK-K2) was made for shooting movie by cosmonaut-operator on the surface of the Moon in conditions of deep vacuum and big temperature differences.
Аппарат имел два переключающихся объектива, электропитание от источника в скафандре космонавта, полностью герметичную конструкцию со специальной теплозащитой.
Перезарядка кинопленки не предусматривалась. После окончания съемок, замок крепежной ленты, опоясывающий киноаппарат, освобождался, после чего корпус распадался на две половины, а кассета забиралась для возврата на Землю.
Camera had two switching lenses, power drawn from a source in the spacesuit of the cosmonaut, and had a vacuum-proof sealed design with special heat insulation. The reloading of film was not meant to happen. After the cassette was finished, the lock of the holding ribbon encircling the camera would release after which the body would split into two halves and the cassette was retrieved for transport back to Rarth.
В связи с тем, что советская программа высадки человека на Луну была свернута, киноаппарат был изготовлен только в опытном образце.
Since the Soviet program of putting a man on the moon was discontinued, the camera was made only in a prototype form.
Разработчики: В. Бусыгин, Г. Алексеев
Developer: V. Busigin, G. Alkseev
Дизайн: Е. Жердев
Design: E. Zherdev.
Source:
http://www.zenitcamera.com/archive/space/k.html