Topic
Topic author: AidasCams
Posted on: 20080221101522
Reply author: Vlad
Replied on: 20080221101939
Modified one though.... ask Bill [:)]
Reply author: James McGee
Replied on: 20080221105500
It's expensive and not totally original, but hey!!! it's a good one for the WIKI catalogue![:)]
Regards, Jim
Reply author: Jacques M.
Replied on: 20080221165804
Hello,
It's me who complained! I had looked two years for a real Fed 1a before finding one about two months ago.
This one is "galvanized" (as mine) and has a good number. But it had a clip: this one bears the three holes as stigmas. Better to keep the clip or to remove? Better no clip and no holes!
As for the price, I won't say anything except that I bought mine half that price. [:)]
Amitiés. Jacques.
Reply author: AidasCams
Replied on: 20080222002528
Jacques,
My best congratulations!!!! Could you tell us more about your new purchase?
Regards,
Aidas
Reply author: Jacques M.
Replied on: 20080222051001
Thanks, Aidas.
In fact, my 1a in a plain one.
It was galvanized as others. Such are yours in the Wiki and the one that Bill shows on his site. If I'm right, Bill's one is # 5340, mine is 5330.
Very often owners added a clip on their 1a (I always wondered why the factory didn't do that by itself)to put an accessory. Then, as the collectors want original cameras now, the sellers remove the clip which leaves three holes more or less occluded.
Another problem is the lens. The original lens must be a "one turn". And its serial number should be not far from the body's one, and in small digits. Mine is 4534, a bit too old to be original but it's a 1a lens. A 1a body without its correct lens is not really a 1a...
Last thing: all my pre war Feds work perfectly, including this 1a. My post war 1f and g are often glued with that stick grease as hard as cement with age... [:D]
Now, I'm waiting for a TSVVS. But ssh... I will tell more only when I have it!
Amitiés. Jacques.
Reply author: Kievuser
Replied on: 20080222105953
A TSVVS? A dream collector's camera. Congratualtions!Drool...
Cheers,
Zhang