USSRPhoto.com

Forums / Collectors and Users Open Forum

MFN-7 Microscope Camera

New Topic Reply to Topic
Back to Forum Previous TopicNext Topic
Printer Friendly Send Topic to a Friend
11 posts in this thread
Jump to reply Jump to bottom

07/24/2009 23:56

Reply with Quote Edit Topic Delete Topic
Hi David, this is a very interesting piece.. I always had a soft spot for technical cameras.. are these the same plates that fit on the Moskva-3? Also any idea on manufacturer? the logo looks like Progress Factory in Leningrad, if judging by the prefix on serial # is 1963 - which makes it LOOMP... (1962 Progress became part of LOOMP and 1965- Lomo) hmm.. any LOOMP markings on the unit besides the logo?

Vlad

07/27/2009 08:26

Reply with Quote Edit Reply Delete Reply
Hi Vlad,
Sorry for the delay in replying, but I have just come out of hospital after a shoulder op. As my Soviet cameras are stored in boxes, each weighing 40-50 lbs, I had to persuade my wife to do a bit of lifting for me. I have photographed the MFN-7 plate holder along with the Moscow-3 and Tourist ones. They are all the same height and width, but the MFN-7 one is thicker (6.2 mm). The other two are 3.16 mm. The only clue to the factory, is the convex lens type logo, which I am not familiar with.


http://www.ussrphoto.com/UserContent/2772009_DSfront.jpg


http://www.ussrphoto.com/UserContent/2772009_DSback.jpg


http://www.ussrphoto.com/UserContent/2772009_DSedge.jpg



David

(http://www.rcccuk.com)

07/27/2009 09:44

Reply with Quote Edit Reply Delete Reply
Hi David! Thanks so much for making these shots! You really didn't have to bother especially with your surgery. I hope you are doing well.

Quite interesting though! Please do not take them out to check again, but just wanted your opinion - do you think they are interchangable between these cameras? I was always wondering whether there was some kind of common plate standard between Soviet factories that at least the medium on which you take pictures is somewhat interchangable or do you guys think if it - it wasn't on purpose - that it's just a coincidence?

Thanks,
Vlad.

07/28/2009 03:19

Reply with Quote Edit Reply Delete Reply
The Moscow-3 and Tourist plate holders are interchangeable, but the one for the MFN-7 has a different edge profile and will not fit the other cameras.

David

(http://www.rcccuk.com)

07/28/2009 13:11

Reply with Quote Edit Reply Delete Reply
Thank you David!

Zoom you do not have the version of the logo that Luiz has on his site on the microscope on your site.. you usually have variations.. does this mean it's not commonly used? I mean the letters around the loupe? Is the loupe itself just an official logo?

Vlad

07/28/2009 16:44

Reply with Quote Edit Reply Delete Reply
quote:
Originally posted by Vlad

Zoom you do not have the version of the logo that Luiz has on his site on the microscope on your site.. you usually have variations.. does this mean it's not commonly used? I mean the letters around the loupe? Is the loupe itself just an official logo?

Please see the note #1 on the page http://www.zenitcamera.com/qa/qa-logos.html#n1
Then, strongly said, a "sign" is not a "logo"... This page describes a signs (a brands -- a stigmas). 'Understanding' a logos are simply and not interesting at all.

quote:
Originally posted by Luiz Paracampo

Zoom
Unhappily those data were given by LOMO people...

I never heard that the "Progress" was a test plant. Before 1936 year it produced a detonating fuses.

quote:
Originally posted by Luiz Paracampo
... and you did not give the corrections.

I don't undersatand what you mean...

07/28/2009 17:49

Reply with Quote Edit Reply Delete Reply
Zoom, Oh ok, I see that you just list the basic "shapes" used in logos basically and not all variations of them. Thanks for the explanation!

Vlad.
New Topic Back to Forum

Reply to Topic

Forum code enabled