New curtains source for zorki
i recently bought some etone shutter curtain to replace the old ones in my zorki3.
I noticed because the etone curtains are only 0.15mm at speed 1/1000 the curtain dosent create a gap, i had to make the drum thicker by adding extra curtain material.
now the gap for 1/1000 at the begin of the travel is about ~1,2mm and at the end ~3,4mm.
So im looking for a better source for zorki curtains since the last post discussing is already over a decade old.
I noticed because the etone curtains are only 0.15mm at speed 1/1000 the curtain dosent create a gap, i had to make the drum thicker by adding extra curtain material.
now the gap for 1/1000 at the begin of the travel is about ~1,2mm and at the end ~3,4mm.
So im looking for a better source for zorki curtains since the last post discussing is already over a decade old.
LikeLike: 0 reactions
LoveLove: 0 reactions
CareCare: 0 reactions
LaughLaugh: 0 reactions
WowWow: 0 reactions
SadSad: 0 reactions
AngryAngry: 0 reactions
Log in to comment.
Ulrich
didn't knew 0.05mm in thickness would make such a huge difference at 1/1000 because the etone curtains seems to work ok for 1/500.
i will look into the curtains from nobbysparrow for my next CLA
I haven't had any problems with nobbysparrow's curtains so far. I also sell refurbished cameras and have only received positive feedback until now.
Maybe the slight difference in thickness does make a difference.
Good luck :-)
Ulrich
http://fotos.cconin.de